Tile corner bracket 60×30 ADVANTA, 90 degrees

The 3D-printed Advanta corner bracket is used as an aid for laying tiles evenly and neatly at external and internal corners. Its compact 60×30 mm size makes it indispensable where standard brackets don't fit — near plumbing fixtures, in niches, at narrow junctions, and when working with small-format tiles.

Main functions of the corner bracket:

• Holds a precise 90° angle while tiles are being laid, until the adhesive dries;
• Thanks to its compact size, it fits into narrow and hard-to-reach spots where a larger bracket can't be installed;
• Provides extra stability for the tile while the adhesive dries, preventing it from shifting or moving while the corner is being formed;
• Saves the installer's time thanks to its ease of use.
• Used when constructing sinks, stairs, window sills, and shower trays in bathrooms, kitchens, balconies, and building facades — anywhere a 90° angle needs to be secured during tiling, especially in narrow areas and with small-format tiles.

Advantages of the ADVANTA 60×30 corner bracket:

• Compact 60×30 mm size — convenient for narrow spots, corner junctions, and small tiles;
• Manufactured by 3D printing — precise corner geometry and a reinforced ribbed structure;
• Ensures a clean, even 90° tile joint while simultaneously holding the tiles in place;
• Made of durable material that withstands chemicals;
• Easy to install, compact, and lightweight;
• Easy to clean and reusable;
• Leaves no scratches on tiles, even on delicate glossy surfaces;
• Delivers a professional, aesthetically pleasing result;
• 3D printing makes it possible to produce brackets for different formats and needs — flexible manufacturing directly from the Advanta factory.

Recommendations for using the ADVANTA 60×30 corner bracket at a 90° angle

1. Begin laying the tiles perpendicular to each other so the joints meet at the corner apex, and form a 90° angle, checking it with a level. Install ADVANTA Horseshoe spacers of the required thickness for an even joint.
2. Once the tiles are correctly positioned, clean the surface where the bracket will be mounted — it must be dry, clean, and degreased.
3. Place the bracket against the surface, secure it on the sides with hot glue, and press firmly. Wait 1–2 minutes for the glue to fully set. Caution: be careful with hot glue!
4. Check the angle with a level.
5. Remove the bracket no earlier than 24 hours after installation, so the tiles are securely fixed.
6. After removal, clean any glue residue off the bracket.

Pro tip:

If the hot glue has hardened and won't come off — soak the bracket in water for 6 hours, or treat the hardened glue spots with an alcohol solution.

The ADVANTA 60×30 mm, 90° tile corner bracket is a compact and effective solution for high-quality tile installation in hard-to-reach places with a straight corner and a professional result!