Tile corner bracket 50×100 ADVANTA, 90 degrees

The 3D-printed Advanta corner bracket is used as an aid for laying tiles evenly and neatly at external and internal corners. Its elongated 50×100 mm shape creates a longer support line along the joint — especially convenient for large-format and heavy tiles, where a straight edge needs to be maintained along the entire length.

Main functions of the corner bracket:

• Holds a precise 90° angle while tiles are being laid, until the adhesive dries;
• Thanks to the extended 100 mm arm, it gives the tile a larger support area — the corner stays more stable;
• Prevents tile shifting while the corner is being formed, until the adhesive sets;
• Saves the installer's time thanks to its ease of use.
• Used when constructing sinks, stairs, window sills, and shower trays in bathrooms, kitchens, balconies, and building facades — anywhere a 90° angle needs to be secured during tiling, especially with large-format tiles.

Advantages of the ADVANTA 50×100 corner bracket:

• Elongated 50×100 mm shape — longer support for large-format tiles and an even joint along the entire edge;
• Manufactured by 3D printing — precise corner geometry and a reinforced ribbed structure;
• Ensures a clean, even 90° tile joint while simultaneously holding the tiles in place;
• Does not deform under load;
• Made of durable, moisture-resistant polymer that withstands chemicals;
• Easy to install, compact, and lightweight;
• Easy to clean and reusable;
• Leaves no scratches on tiles, even on delicate glossy surfaces;
• Delivers a professional, aesthetically pleasing result;
• 3D printing makes it possible to produce brackets for different formats and needs — flexible manufacturing directly from the Advanta factory.

Recommendations for using the ADVANTA 50×100 corner bracket at a 90° angle

1. Begin laying the tiles perpendicular to each other so the joints meet at the corner apex, and form a 90° angle, checking it with a level. Install ADVANTA Horseshoe spacers of the required thickness for an even joint.
2. Once the tiles are correctly positioned, clean the surface where the bracket will be mounted — it must be dry, clean, and degreased.
3. Place the bracket against the surface, secure it on the sides with hot glue, and press firmly. Wait 1–2 minutes for the glue to fully set. Caution: be careful with hot glue!
4. Check the angle with a level.
5. Remove the bracket no earlier than 24 hours after installation, so the tiles are securely fixed.
6. After removal, clean any glue residue off the bracket.

Pro tip:

If the hot glue has hardened and won't come off — soak the bracket in water for 6 hours, or treat the hardened glue spots with an alcohol solution or antiseptic, and cleaning will be easy!

The ADVANTA 50×100 mm, 90° tile corner bracket is an effective solution for high-quality installation of large-format tiles with a straight corner and a professional result!