Tile corner bracket 50×50 ADVANTA, 90 degrees

The 3D-printed Advanta corner bracket is used as an aid for laying tiles evenly and neatly at external and internal corners. Its symmetrical 50×50 mm shape with equal arms provides identical support on both sides of the corner — a universal size suitable for most common tiling tasks.

Main functions of the corner bracket:

• Holds a precise 90° angle while tiles are being laid, until the adhesive dries;
• Thanks to its equal 50×50 mm arms, it supports both tiles evenly, forming a clean, symmetrical corner;
• Provides extra stability for the tile while the adhesive dries, preventing it from shifting or moving while the corner is being formed;
• Saves the installer's time thanks to its ease of use.
• Used when constructing sinks, stairs, window sills, and shower trays in bathrooms, kitchens, balconies, and building facades — anywhere a 90° angle needs to be secured during tiling.

Advantages of the ADVANTA 50×50 corner bracket:

• Symmetrical 50×50 mm shape — equal support on both sides and versatility for most tasks;
• Manufactured by 3D printing — precise corner geometry and a reinforced ribbed structure;
• Ensures a clean, even 90° tile joint while simultaneously holding the tiles in place;
• Made of durable polymer that withstands chemicals;
• Easy to install, compact, and lightweight;
• Does not deform under load;
• Easy to clean and reusable;
• Leaves no scratches on tiles, even on delicate glossy surfaces;
• Delivers a professional, aesthetically pleasing result;
• 3D printing makes it possible to produce brackets for different formats and needs — flexible manufacturing directly from the manufacturer.

Recommendations for using the ADVANTA 50×50 corner bracket at a 90° angle

1. Begin laying the tiles perpendicular to each other so the joints meet at the corner apex, and form a 90° angle, checking it with a level. Install ADVANTA Horseshoe spacers of the required thickness for an even joint.
2. Once the tiles are correctly positioned, clean the surface where the bracket will be mounted — it must be dry, clean, and degreased.
3. Place the bracket against the surface, secure it on the sides with hot glue, and press firmly. Wait 1–2 minutes for the glue to fully set. Caution: be careful with hot glue!
4. Check the angle with a level.
5. Remove the bracket no earlier than 24 hours after installation, so the tiles are securely fixed.
6. After removal, clean any glue residue off the bracket.

Pro tip:

If the hot glue has hardened and won't come off — treat the glue spots with an alcohol solution, and the glue will come off the product easily.

The ADVANTA 50×50 mm, 90° tile corner bracket is a universal and effective solution for high-quality tile installation with a straight corner and a professional result!